|
| |
TM 9-2320-364-20-4
9-7
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(7)
Apply adhesive sealant to threads of shift
rod (14).
(8)
Install copper washer (9) and locknut (8) on
shift rod (14). Tighten to 180 lb-in
(20 N.m).
(9)
Coat preformed packing (6) with a light
coating of oil.
(10)
Install preformed packing (6) on cap
nut (5).
(11)
Install cap nut (5) on air chamber (7).
(12)
Install air line 2923 (1) and air line 2874
(2) on elbow (3) and elbow (4).
c.
Follow-On Maintenance:
Start engine, (TM 9-2320-364-10).
Check transfer case operation, (TM 9-2320-364-10).
Build up air pressure to 125 psi (861 kPa).
Shut OFF engine, (TM 9-2320-364-10).
Check for air leaks, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
