|
| |
TM 9-2320-364-20-4
9-10
9-4. TRANSFER CASE SHIFT ASSEMBLY REPLACEMENT (CONT).
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(1)
Apply adhesive to rear of transfer case shift
cable bracket (11).
(2)
With the aid of an assistant, install front
transfer case shift cable bracket (11) on cab
structure with two screws (12) and
locknuts (13).
NOTE
Make sure transfer case shifter is
in Neutral (N).
(3)
Install and align transfer case shift cable
(10) on front transfer case shift cable
bracket (11) and tighten jam nut (9).
|
