|
| |
TM 9-2320-364-20-4
9-11
(4)
Install knob (8) on transfer case shift assembly (6).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(5)
Apply adhesive on rear side of transfer case shift assembly (6).
(6)
Position transfer case shift assembly (6) in cab structure (7) with three screws (4).
(7)
With the aid of an assistant, install three locknuts (5) on screws (4).
(8)
Position adjustable clevis (3) on transfer case shift assembly (6).
(9)
Install yoke pin (2) and cotter pin (1) on adjustable clevis (3).
c.
Follow-On Maintenance:
Adjust transfer case shift cable, (Para 9-5).
Engine access panel installed, (Para 17-24).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
