|
| |
TM 9-2320-364-20-4
9-16
9-6. TRANSFER CASE SHIFT CABLE REPLACEMENT (CONT).
(5)
Remove locknut (12), screw (13) and bracket (14) from crossmember (15).
(6)
Remove locknut (16), screw (17) and cushion clip (18) from transfer case shift cable (3). Discard
locknut.
(7)
With the aid of an assistant, remove transfer
case shift cable (3) from truck.
(8)
Loosen four jam nuts (5) and (10) and remove
two clevises (4) and (9) from ends of transfer
case shift cable (3).
b.
Installation.
NOTE
Install cable ties as needed.
(1)
Install four jam nuts (5) and (10) and two
clevises (4) and (9) on transfer case shift
cable (3).
(2)
With the aid of an assistant, position transfer
case shift cable (3) in truck and install
cushion clip (18) with screw (17) and
locknut (16). Tighten locknut to 23 lb-ft
(31 N.m).
(3)
Install bracket (14) on crossmember (15)
with screw (13) and locknut (12).
|
