|
| |
TM 9-2320-364-20-4
11-9
(4)
Disconnect air line 2419 (1) from fitting (6).
(5)
Remove fitting (6) from tee (7).
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
NOTE
Install cable ties as required.
(1)
Apply sealing compound to threads of
tee (7).
(2)
Install fitting (6) on tee (7).
(3)
Install air line 2419 (1) on fitting (6).
(4)
Install preformed packing (5) and washer (4)
on fitting (2).
(5)
Install fitting (2) in locking cylinder (3).
(6)
Install air line 2419 (1) on fitting (2).
c.
Follow-On Maintenance:
Start engine, (TM 9-2320-364-10).
Build up air pressure to 125 psi, (861 kPa).
Shut OFF engine, (TM 9-2320-364-10).
Check for air leaks, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
