|
| |
TM 9-2320-364-20-4
11-22
11-9. AXLE NO. 5 LOCKING CYLINDER LINES AND FITTINGS REPLACEMENT
(CONT).
(4)
With the aid of an assistant, install two
cushion clips (8) on crossmember (9) with
two screws (7) and locknuts (6).
(5)
Install preformed packing (5) and washer (4)
on fitting (2).
(6)
Install fitting (2) in locking cylinder (3).
(7)
Install air line 2338 (1) on fitting (2).
c.
Follow-On Maintenance:
Start engine, (TM 9-2320-364-10).
Build up air pressure to 125 psi (861 kPa).
Shut OFF engine, (TM 9-2320-364-10).
Check for air leaks, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
