|
| |
TM 9-2320-364-20-4
12-28
Materials/Parts
Sealing Compound (Item 72, Appendix C)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Air system drained, (TM 9-2320-364-10)
Instrument panel removed, (Para 7-13)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
12-8. HAND BRAKE SWITCH REPLACEMENT.
a.
Removal.
(1)
Remove two nuts (1), lockwashers (2), two
wires 1005 (3), wire 1009 (4) and two
washers (5) from terminals (6).
(2)
Remove switch (7) from pressure fitting
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(1)
Coat threads of switch (7) with sealing
compound.
(2)
Install switch (7) in pressure fitting (8).
(3)
Install two washers (5), wires 1005 (3), wire
1009 (4), two lockwashers (2) and nuts (1)
on terminals (6).
|
