|
| |
TM 9-2320-364-20-4
12-40
12-10. AXLES NO. 3, 4 AND 5 AIR CHAMBER REPLACEMENT (CONT).
NOTE
Perform Step (9) only if
fittings are damaged or new
air chamber is being
installed.
Note location and position of
elbows and tee prior to
removal.
(9)
Remove tee (8), elbow (9), elbow (11) and
elbow (13) from air chamber (4).
Ensure brake drum is not pulled
back more than approximately
two inches (5 cm). Failure to
comply may result in injury or
death to personnel.
(10)
Pull brake drum (17) back approximately
two inches (5 cm).
(11)
Using spanner wrench, loosen collet
nut (14).
(12)
Remove air chamber (4) and wedge
assembly (15) from brake assembly (16).
NOTE
Perform Step (13) only if collet
nut is damaged.
(13)
Remove collet nut (14) from air
chamber (4).
|
