|
| |
TM 9-2320-364-20-4
12-58
12-14. SERVICE RELAY VALVE NO. 2 REPLACEMENT (CONT).
NOTE
Tag and mark position of fittings
and plugs before removal.
(5)
Remove tee (12) from service relay
valve (10).
(6)
Remove two elbows (3) from tee (12).
(7)
Remove elbow (5) from service relay
valve (10).
(8)
Remove elbow (7) from service relay
valve (10).
(9)
Remove three pipe plugs (13) from service
relay valve (10).
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(1)
Apply sealing compound to threads of three pipe plugs (13).
(2)
Install three pipe plugs (13) in service relay valve (10).
(3)
Apply sealing compound to threads of elbow (7).
(4)
Install elbow (7) in service relay valve (10).
(5)
Apply sealing compound to threads of elbow (5).
(6)
Install elbow (5) in service relay valve (10).
(7)
Apply sealing compound to threads of two elbows (3).
(8)
Install two elbows (3) in tee (12).
(9)
Apply sealing compound to threads of tee (12).
(10)
Install tee (12) in service relay valve (10).
|
