|
| |
TM 9-2320-364-20-5
14-14
14-6. STEERING COLUMN AND BRACKET REPLACEMENT (CONT).
NOTE
Perform Steps (8) through (11) if removing brackets.
(8)
Loosen jam nut (22) on hand brake handle (23).
(9)
Remove hand brake handle (23) from hand brake valve (24).
(10)
Remove three screws (25) and hand brake valve (24) from bracket (13).
(11)
Remove two screws (26), locknuts (27), and two brackets (12) and (13) from bracket support (28).
Discard locknuts.
b.
Installation.
NOTE
Perform Steps (1) through (4) if brackets were removed.
Install cable ties as required.
(1)
Install two screws (26), locknuts (27), brackets (12) and (13) on bracket support (28).
(2)
Install hand brake valve (24) with three screws (25) on bracket (13).
(3)
Install hand brake handle (23) in hand brake valve (24) until threads of hand brake handle bottom out in
hand brake valve.
(4)
Tighten jam nut (22) on trailer hand brake handle (23) to 13 lb-ft (17 N.m).
|
