|
| |
TM 9-2320-364-20-5
14-22
Materials/Parts
Cable Ties (2) (Item 25, Appendix C)
Cross and Bearing (Item 28, Appendix F)
Fitting, Lubrication (Item 42, Appendix F)
Key (Item 85, Appendix F)
Locknut (Item 133, Appendix F)
Locknut (Item 143, Appendix F)
This task covers:
a. Removal
c. Cleaning/Inspection
e. Installation
b. Disassembly
d. Assembly
f. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Bar, Crow (Item 4, Appendix G)
Compressor Unit, Air (Item 11, Appendix G)
Gloves, Chemical Oil Protective
(Item 28, Appendix G)
Goggles, Industrial (Item 30, Appendix G)
Gun, Airblow (Item 31, Appendix G)
Wrench, Torque (0 to 175 lb-ft [0 to 24 N.m])
(Item 95, Appendix G)
14-9. GEAR BOX STEERING SHAFT REPAIR.
a.
Removal.
NOTE
Note location and position of steering shaft yokes on intermediate steering box and gear
reduction box prior to removal.
Do not move truck during replacement of steering shaft. If wheels are moved, notify
Direct Support to perform steering timing procedure.
(1)
Remove locknut (1), screw (2) and steering shaft (3) from intermediate steering gear assembly (4). Discard
locknut.
|
