| |
TM 9-2320-364-20-5
14-23
(2)
Remove locknut (5), screw (6), steering shaft
(3) and key (7) from reduction gear box (8).
Discard locknut and key.
b.
Disassembly.
(1)
Position steering shaft (1) on clean work surface.
(2)
Remove lube fitting (2) from steering shaft (1).
(3)
Remove two tie straps (3) from dust boot (4) and position dust boot (4) on yoke end (5).
(4)
Remove screw (6) from dust cap (7).
(5)
Remove yoke end (5), dust boot (4), dust cap (7) and ring clamp (8) from steering shaft (1).
|