|
| |
TM 9-2320-364-20-5
15-3
Skid plate weighs 130 lbs (59 kg). Attach suitable lifting device prior to removal to prevent
injury to personnel.
Ensure lifting device is not attached to skidplate frame. Failure to comply may result in
damage to equipment.
(3)
Attach lifting device to skid plate (4).
NOTE
Perform Step (4) if truck is not
equipped with machine gun ring.
Otherwise, go to Step (5).
(4)
Remove four locknuts (8), screws (9) and
washers (10) from skid plate (4). Discard
locknuts.
(5)
Remove five locknuts (11) and screws (12)
from bottom of skid plate (4). Discard
locknuts.
(6)
Remove eight self-tapping screws (13) from sides of skid plate (4). Discard self-tapping screws.
(7)
With the aid of an assistant, remove nine self-tapping screws (14) from top of skid plate (4). Discard self-
tapping screws.
(8)
With the aid of an assistant, remove skid plate (4) from skid plate structure (15).
(9)
Remove lifting device from skid plate (4).
b.
Installation.
Skid plate weighs 130 lbs (59 kg). Attach suitable lifting device prior to installation to prevent
injury to personnel.
(1)
Attach lifting device to skid plate (4).
(2)
With the aid of an assistant, position skid plate (4) on skid plate structure (15).
(3)
With the aid of an assistant, position nine self-tapping screws (14) in top of skid plate (4).
(4)
With the aid of an assistant, position eight self-tapping screws (13) in sides of skid plate (4).
(5)
With the aid of an assistant, install five screws (12) and locknuts (11) in bottom of skid plate (4).
|
