|
| |
TM 9-2320-364-20-5
15-4
15-2. SKID PLATE REPLACEMENT (CONT).
(6)
Tighten nine self-tapping screws (14) and
eight self-tapping screws (13).
(7)
Remove lifting device from skid plate (4).
NOTE
Perform Step (8) if truck is not
equipped with machine gun ring.
(8)
Install four washers (10), screws (9) and
locknuts (8) in skid plate (4).
(9)
Install skid plate blackout lamp guard (7),
with two lockwashers (6) and screws (5) on
skid plate (4).
(10)
Install skid plate window guard (3) with
two lockwashers (2) and screws (1) on skid
plate (4).
c.
Follow-On Maintenance:
Install machine gun front support (if equipped), (Para 22-4).
Install machine gun ring (if equipped), (Para 22-2).
Install cab steps, (Para 15-5).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
