|
| |
TM 9-2320-364-20-5
15-18
15-7. AIR DRYER BRACKET REPLACEMENT (CONT).
NOTE
Trucks not equipped with crane
will have spacers behind bracket.
(2)
With the aid of an assistant, remove four
locknuts (6), screws (7), spacer (8), spacer
(9) and air dryer mounting bracket (5) from
frame (10). Discard locknuts.
b.
Installation.
(1)
With the aid of an assistant, install air dryer
mounting bracket (5) on frame (10) with
four screws (7), spacer (8), spacer (9) and
locknuts (6).
(2)
Install two screws (4), four biscuits (3), eight
washers (2), and two locknuts (1) on air
dryer mounting bracket (5). Tighten
locknuts until washer to washer
measurement is 1-5/16 inches (33mm).
c.
Follow-On Maintenance:
Install air dryer reservoir, (Para 12-35).
Install fuel/water separator and bracket, (Para 4-16).
Install air dryers and aftercooler, (Para 12-20).
Install coalescing filter assembly, (Para 12-23).
Install air dryer guard (if equipped), (Para 12-19).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
3
2
2
3
1
5
4
7
9
8
6
10
5
7
|
