|
| |
TM 9-2320-364-20-5
15-19
Materials/Parts
Locknut (6) (Item 92, Appendix F)
Locknut (2) (Item 92, Appendix F) (if equipped
with CHU)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
CHU long strut bracket assembly removed
(if equipped), (Para 21-33)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Socket Set, 3/4 in. (Item 61, Appendix G)
15-8. REAR HARD LIFT ASSEMBLY REPLACEMENT.
Materials/Parts
Locknut (6) (Item 140, Appendix F) (if not
equipped with CHU)
Lockwasher (4) (Item 168, Appendix F)
(1)
Remove two tie down straps (1) from left hand extension assembly (2) and right hand extension
assembly (3).
(2)
Remove two screws (4), screws (5), four lockwashers (6) and washers (7) from extension assemblies
(2) and (3). Discard lockwashers.
Right hand and left hand extension assemblies weigh 110 lb (50 kg) each. Use the aid of an
assistant when lifting to prevent injury to personnel.
(3)
With the aid of an assistant, remove left hand extension assembly (2) and right hand extension assembly
(3) from deck assembly (8).
|
