|
| |
TM 9-2320-364-20-5
15-21
(6)
Remove quick disconnect pin (16), pin (17)
and left strut assembly (11) from left collar
bracket assembly (12).
(7)
Remove quick disconnect pin (18), pin (19)
and hard lift slider bracket (20) from hard lift
support bracket (13).
NOTE
Perform Step (8) only if snapper
pin and/or wire is damaged.
(8)
Remove snapper pin (21), wire (22) and
swaging sleeve (23) from hard lift slider
bracket (20) and pin (19).
(9)
Remove quick disconnect pin (24) and pin
(25) from left strut assembly (11).
(10)
Separate rear hard lift strut (26) and front
hard lift strut (27).
(11)
Repeat Steps (6) through (10) for right strut
assembly.
NOTE
Left and right brackets are
different on trucks equipped with
CHU, however, removal
procedures are identical.
(12) With the aid of an assistant, remove six
locknuts (28), screws (29) and deck
assembly (8) from left bracket (30) and right
bracket (31). Discard locknuts.
NOTE
Perform Steps (13) and (14)
for trucks not equipped
with CHU.
Perform Steps (15) and (16)
for trucks equipped with
CHU.
(13)
With the aid of an assistant, remove three
locknuts (32), screws (33) and left bracket (30)
from frame (34). Discard locknuts.
(14) With the aid of an assistant, remove three
locknuts (32), screws (33) and right
bracket (31) from frame (34).
(15) With the aid of an assistant, remove locknut
(32), screw (33) and left bracket (30) from
frame (34). Discard locknut.
(16) With the aid of an assistant, remove locknut
(32), screw (33) and right bracket (31) from
frame (34). Discard locknut.
18
19
23
22
13
25
11
26
16
24
17
12
21
20
27
|
