|
| |
TM 9-2320-364-20-5
15-22
15-8. REAR HARD LIFT ASSEMBLY REPLACEMENT (CONT).
b.
Installation.
NOTE
Left and right brackets are
different on trucks equipped
with CHU, however,
installation procedures are
identical.
Perform Steps (1) and (2)
for trucks not equipped
with CHU.
Perform Steps (3) and (6)
for trucks equipped with
CHU.
(1)
Install right bracket (31) on frame (34) with
three screws (33) and locknuts (32).
(2)
Install left bracket (30) on frame (34) with
three screws (33) and locknuts (32).
(3)
Install right bracket (31) on frame (34) with
screw (33) and locknut (32) in rear position.
Do not tighten.
(4)
Install left bracket (30) on frame (34) with
screw (33) and locknut (32) in rear position.
Do not tighten.
(5)
Install long strut bracket assembly, (Para
21-33).
(6)
Tighten two locknuts (32).
(7)
Install deck assembly (8) on left bracket (30)
and right bracket (31) with six screws (29)
and locknuts (28).
NOTE
Perform Steps (8) and (9)
for trucks not equipped
with CHU.
Perform Steps (10) through
(15) for trucks equipped
with CHU.
(8)
Install left strut assembly (11), two pins (10)
and quick disconnect pins (9) on left collar
bracket assembly (12) and hard lift support
bracket (13).
|
