|
| |
TM 9-2320-364-20-5
15-30
15-11. REAR HARD LIFT BRACKET REPLACEMENT (CONT).
(7)
Remove two quick release pins (15) and two
pins (16) from right and left hard lift
brackets (4).
(8)
Remove four locknuts (17) and screws (18)
from right and left hard lift brackets (4).
Discard locknuts.
(9)
Remove six locknuts (19) and screws (20)
from right and left hard lift brackets (4).
Discard locknuts.
Each hard lift bracket weighs 67
lbs (30 kg). Attach a suitable
lifting device prior to removal to
prevent possible injury to
personnel.
(10)
Attach lifting device to each hard lift
bracket (4), one at a time.
(11)
Remove ten locknuts (19), screws (21) and right and left hard lift brackets (4) from frame (22). Discard
locknuts.
b.
Installation.
Each hard lift bracket weighs 67 lbs (30 kg). Attach a suitable lifting device prior to
installation to prevent possible injury to personnel.
(1)
Attach lifting device to each hard lift bracket (4), one at a time.
(2)
Install each hard lift bracket (4) on frame (22) with ten screws (21) and locknuts (19). Tighten locknuts
hand tight.
(3)
Install six screws (20) in right and left hard lift brackets (4) and frame (22) with six locknuts (19). Tighten
locknuts hand tight.
(4)
Install four screws (18) in right and left hard lift brackets (4) and frame (22) with four locknuts (17).
Tighten locknuts to 210 lb-ft (285 N.m).
(5)
Tighten sixteen locknuts (19) to 375 lb-ft (508 N.m).
(6)
Install two pins (16) in right and left hard lift bracket (4) with two quick release pins (15).
|
