|
| |
TM 9-2320-364-20-5
15-36
Materials/Parts
Locknut (4) (Item 92, Appendix F)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine Off, (TM 9-2320-364-10)
Wheels Chocked, (TM 9-2320-364-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
15-13. TIE DOWN RING REPLACEMENT.
a.
Removal.
NOTE
There are six tie down rings. The
front right and left are removed at
direct support. The remaining
four are all removed the same
way with the exception of one
which also has a valve bracket.
The one with the valve bracket is
shown.
(1)
Remove bolt ring (1) from rectangular plain
nut (2).
(2)
Remove four locknuts (3), screws (4) and
rectangular plain nut (2) from frame (5) and
bracket (6). Discard locknuts.
b.
Installation.
(1)
Install rectangular plain nut (2) on bracket
(6) and frame (5) with four screws (4) and
locknuts (3).
(2)
Install bolt ring (1) on rectangular plain nut (2).
c.
Follow-On Maintenance:
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
1
2
5
4
3
6
|
