|
| |
TM 9-2320-364-20-5
15-39
Adhesives, solvents and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
NOTE
Perform Steps (8) through (10)
for Model A connector.
(8)
Apply a thin strip of adhesive completely
around rear of MC16 connector (6).
(9)
Install boot (2) on MC16 connector (6) with
cable tie (1).
(10)
Apply a thin strip of adhesive to rear of boot
(2) where wires (3) enter boot (2).
c.
Follow-On Maintenance:
Install gladhand, (Para 12-43).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
