|
| |
TM 9-2320-364-20-5
15-43
NOTE
Nut is installed properly when nut
is tightened and roller does not
bind.
(4)
Install thrust washer (5), lockwasher (4), nut
(3) and lube fitting (2) on roller (6). Tighten
nut. Bend lockwasher tab into nut slot.
(5)
Bend tab of lockwasher (4) into slot of
nut (3).
(6)
Remove lifting device from roller (6).
c.
Follow-On Maintenance:
Install rear roller assembly, (Para 15-17).
Install angled rollers, (Para 15-16).
Lubricate roller assembly, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
