|
| |
TM 9-2320-364-20-5
16-5
(b)
Remove locknut (5) and stud (6) from
shock absorber bracket (7). Discard
locknut.
(c)
With the aid of an assistant, remove
two locknuts (8) and screws (9) from
bracket (7). Discard locknuts.
NOTE
Assistant must hold screws
through cab front access
panel.
Position socket on locknut,
then position extension
through bottom frame hole
into socket.
(d)
With the aid of an assistant, remove
locknut (10) and screw (11) from
bracket (7). Discard locknut.
(e)
Repeat Step (d) for remaining
locknut (10) and screw (11). Discard
locknut.
(f)
Remove shock absorber bracket (7)
from frame (12).
(2)
Installation.
(a)
Position shock absorber bracket (7) on
frame (12).
NOTE
Assistant must hold screws
through cab front access panel.
(b)
With the aid of an assistant, position
two screws (11) and locknuts (10) in
bracket (7).
NOTE
Position socket on locknut, then position extension through bottom frame hole into socket.
(c)
Tighten screw (11) and locknut (10) on bracket (7).
(d)
Repeat Step (c) for remaining locknut (10) and screw (11).
(e)
With the aid of an assistant, install two locknuts (8) and screws (9) in bracket (7).
(f)
With the aid of an assistant, install stud (6) on shock absorber bracket (7) with locknut (5).
Tighten locknut (5) to 200 lb-ft (271 N.m).
|
