|
| |
TM 9-2320-364-20-5
17-15
(8)
Remove three self-tapping screws (10) and
door seal bracket (11) from cab assembly (5).
Discard screws.
(9)
Remove door seal (12) from cab
assembly (5).
NOTE
Nut strip and locknut are
removed through cut out on
back side of door frame in
cab.
Note position of nut strip
prior to removal.
Nut strip can fall into door
jam during removal.
(10)
Remove two screws (13), nut strip (14) and
dovetail guide (15) from cab assembly (5).
Discard nut strip.
(11)
Remove locknut (16), washer (17) and
striker pin (18) from cab assembly (5).
Discard locknut.
|
