|
| |
TM 9-2320-364-20-5
17-134
17-54. STOWAGE BOX AND BRACKET REPLACEMENT (CONT).
NOTE
Step (4) is for self recovery winch
equipped trucks only.
(4)
Remove two locknuts (9), screws (10) and
separate two cushion clamps (11) from box
assembly (4). Discard locknuts.
(5)
If necessary for replacement, remove two
bleeder valves (12) from box assembly (4).
(6)
Remove two locknuts (13), washers (14),
springs (15) and screws (16). Discard
locknuts.
(7)
Remove two locknuts (17) and screws (18).
Discard locknuts.
Box assembly weighs 92 lbs
(42 kg). Ensure box assembly
is properly supported to prevent
possible injury to personnel.
(8)
With the aid of an assistant, remove box
assembly (4) from left hand brackets (19)
and right hand bracket (20).
|
