|
| |
TM 9-2320-364-20-5
17-135
(9)
With the aid of an assistant, remove two
locknuts (21), screws (22) and (23) and LH
bracket (19). Discard locknuts.
(10)
With the aid of an assistant, remove two
locknuts (24), screws (25) and RH
bracket (20). Discard locknuts.
b.
Installation.
NOTE
If installing box assembly only,
perform Steps (1) through (9).
If installing door panel
assembly only, perform Steps
(10) through (12).
(1)
With the aid of an assistant, install RH
bracket (20) with two screws (25) and
locknuts (24).
(2)
With the aid of an assistant, install LH
bracket (19) with two screws (22) and (23)
and locknuts (21).
Box assembly weighs 92 lbs
(42 kg). Ensure box assembly
is properly supported prior to
installation to prevent possible
injury to personnel.
(3)
With the aid of an assistant, install box
assembly (4) on two brackets (19) and (20).
(4)
Install two screws (18) and locknuts (17).
(5)
Install two screws (16), springs (15),
washers (14) and locknuts (13). Tighten
locknuts until spring height is 2-3/4 in.
(69.85 mm).
|
