|
| |
TM 9-2320-364-20-5
17-136
17-54. STOWAGE BOX AND BRACKET REPLACEMENT (CONT).
(6)
If removed, install two bleeder valves (12)
on box assembly (4).
NOTE
Step (7) is for self recovery winch
equipped trucks only.
(7)
Install two cushion clamps (11) on box
assembly (4) with two screws (10)
and locknuts (9).
NOTE
Step (8) is for trucks equipped
with auxiliary fuel tanks only.
(8)
Grind off end of water guard (8), if
necessary, for water guard to clear fuel tank
brackets.
(9)
Install water guard (8), six screws (7) and
locknuts (6).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(10)
Coat new door seal seam (5) with adhesive.
NOTE
Install door seal so that seam of
door seal is on bottom side of
box assembly.
(11)
Install door seal (5) on box assembly (4).
(12)
Install door panel assembly (3) on box
assembly (4) with six screws (2) and
locknuts (1).
(13)
Apply sealing compound to hinge edges of
door panel assembly (3).
|
