|
| |
TM 9-2320-364-20-5
18-15
(20)
Lift switch guard (41) and mark position.
(21)
Remove nut (42), switch guard (41), nylon
washer (43), rubber washer (44) and washer
(45) from ON/OFF switch (46).
(22)
Pull ON/OFF switch (46) out of box (2)
through controller hole.
(23)
Remove four connectors (47) from ON/OFF
switch (46).
(24)
Remove ground wire (48) from ground
terminal (49).
(25)
Remove wire harness (50) from box (2).
NOTE
Perform Step (26) only if data
plate is damaged, or if replacing
box.
(26)
Drill out and remove four rivets (51), data
plate (52) and ground terminal (49) from
box (2).
|
