|
| |
TM 9-2320-364-20-5
18-18
18-4. CRANE REMOTE CONTROL BOX REPAIR (CONT).
(12)
Install spacer (23), insulator (22) and
switch (19) on controller (18) with two
screws (21).
(13)
Connect connector (20) on switch (19).
(14)
Install insulator (17) and switch (14) on
controller (18) with two screws (16).
(15)
Connect connector (15) on switch (14).
(16)
Repeat Steps (12) through (15) for
telescope controller, hoist controller and
boom controller.
(17)
Install nut (12) and knob (13) on swing
control lever assembly (10).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(18)
Apply silicone compound to shaft (53) on
swing control lever assembly (10).
(19)
Install preformed packing (11) on swing
control lever assembly (10).
(20)
Apply adhesive to underside of head on
screw (9).
(21)
Install swing control lever assembly (10) on
swing controller (5) with screw (9).
|
