|
| |
TM 9-2320-364-20-5
18-63
Materials/Parts
Tags, Identification (Item 88, Appendix C)
Locknut (12) (Item 92, Appendix F)
Lockwasher (2) (Item 165, Appendix F)
Packing, Preformed (3) (Item 251, Appendix F)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
LHS fully extended, (TM 9-2320-364-10)
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Batteries disconnected, (Para 7-87)
Winch cable removed, (Para 18-17)
Crane storage box removed (trucks equipped
with crane only), (Para 17-55)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Cap and Plug Set (Item 8, Appendix G)
Pan, Drain (Item 47, Appendix G)
Socket Set, 3/4 in. (Item 62, Appendix G)
Wrench, Combination 1-1/8 in.
(Item 79, Appendix G)
Wrench, Combination 1-1/4 in.
(Item 80, Appendix G)
Wrench, Combination 1-3/8 in.
(Item 82, Appendix G)
Wrench, Combination 1-5/8 in.
(Item 84, Appendix G)
Wrench, Torque (0 to 300 lb-ft [0-407 N.m])
(Item 96, Appendix G)
Lifting Device, Minimum Capacity 645 lb
(293 kg)
18-12. SELF-RECOVERY WINCH (SRW) REPLACEMENT.
a.
Removal.
NOTE
Tag and mark connectors, hoses and tubes upon removal.
Cap and plugs hoses and tubes upon removal.
(1)
Loosen screw (1) and disconnect MC121 connector (2) from control valve (3).
(2)
Loosen screw (4) and disconnect MC122 connector (5) from control valve (3).
(3)
Loosen screw (6) and disconnect MC123 connector (7) from control valve (3).
|
