|
| |
TM 9-2320-364-20-5
18-64
18-12. SELF-RECOVERY WINCH (SRW) REPLACEMENT (CONT).
(4)
Position drain pan under hydraulic tubes (8)
and (9).
(5)
Loosen nuts (10) and (11) and remove
hydraulic tube (8) from fittings (12)
and (13).
(6)
Loosen nuts (14) and (15) and remove
hydraulic tube (9) from fittings (16)
and (17).
(7)
Remove hose (18) and preformed
packing (19) from elbow (20) on control
valve (3). Discard preformed packing.
(8)
Remove hose (21) and preformed
packing (22) from elbow (23) on control
valve (3). Discard preformed packing.
(9)
Remove hose (24) and preformed
packing (25) from fitting (26) on control
valve (3). Discard preformed packing.
(10)
Remove two screws (27) lockwashers (28),
washers (29) and bracket (30) from
winch (31). Discard lockwashers.
|
