|
| |
TM 9-2320-364-20-5
18-77
b.
Disassembly.
NOTE
Note position of grease fittings
before removal.
(1)
Remove three grease fittings (1) from rear
tension guide assembly (2).
(2)
Remove cotter pin (3), locknut (4), screw
(5), bracket (6), roller assembly (7) and
spacer (8) from tension plate assembly (9).
Discard cotter pin and locknut.
(3)
Remove two locknuts (10), U-bolt (11) and
spring (12) from rear tension guide
assembly (2). Discard locknuts.
(4)
Remove two locknuts (13), U-bolt (14) and
spring (12) from tension pivot
assembly (15). Discard locknuts.
(5)
Remove locknut (16) from screw (17).
Discard locknut.
(6)
Remove cotter pin (18) and bracket (19)
from tension pivot assembly (15). Discard
cotter pin.
(7)
Remove roller assembly (20) from tension
pivot assembly (15).
|
