|
| |
TM 9-2320-364-20-5
19-9
NOTE
Connector is removed by gently prying on lock tab and pulling connector apart.
(8)
Disconnect MC5 connector (13) from windshield wiper motor connector (14).
(9)
Remove four self-tapping screws (15) from windshield wiper motor mounting plate (16) and bracket (17).
Discard self-tapping screws.
NOTE
Conlinks are removed by prying
arms from crank assembly.
(10)
Disconnect two conlinks (18) from
windshield wiper crank assembly (19).
(11)
Remove windshield wiper motor (20) from
windshield wiper motor mounting
bracket (17).
b.
Installation.
(1)
Position windshield wiper motor (20) on
windshield wiper motor mounting
bracket (17).
NOTE
Left wiper arm is installed first.
(2)
Connect two conlinks (18) on windshield
wiper crank assembly (19).
|
