|
| |
TM 9-2320-364-20-5
19-10
19-4. WINDSHIELD WIPER MOTOR REPLACEMENT (CONT).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(3)
Coat threads of four self-tapping screws (15)
with sealing compound.
(4)
Install four self-tapping screws (15) on
windshield wiper motor mounting plate (16)
and bracket (17). Tighten screws 90 to 110
lb-in (10 to 12 N.m).
NOTE
Install cable ties as required.
(5)
Connect MC5 connector (13) on windshield
wiper motor connector (14).
(6)
Install defroster tubing (11) on plenum (12).
11
12
|
