|
| |
TM 9-2320-364-20-5
19-20
19-8. WINDSHIELD WASHER RESERVOIR AND BRACKET REPAIR (CONT).
(4)
Remove two lock screws (8) and bracket (9)
from cab (10). Discard lock screws.
(5)
Remove three locknuts (11), screws (12) and
windshield washer reservoir bracket (7) from
bracket (9). Discard locknuts.
NOTE
Perform Step (6) if foam gaskets
are damaged.
(6)
Remove two foam gaskets (13) from
windshield washer reservoir bracket (7).
b.
Disassembly.
(1)
Remove cover assembly (1) from windshield
washer reservoir (2).
(2)
Remove umbrella valve (3) from cover
assembly (1).
(3)
Remove rubber tubes (4) and (5) and plastic
tube (6) from washer pump (7).
(4)
Remove screen (8) from washer pump (7).
(5)
Remove rubber tubes (4) and (5) from cover
assembly (1).
(6)
Remove two connectors (9) from rubber
tubes (4) and (5).
(7)
Remove two grommets (10) from cover
assembly (1).
c.
Cleaning/Inspection.
(1)
Clean screen and inspect for damage.
(2)
Inspect umbrella valve and rubber tubes for
tears, cracking or damage.
(3)
Inspect gasket on cover assembly for tears,
cracking or damage.
(4)
Inspect condition of two foam gaskets inside
reservoir bracket. Replace if flattened or
missing.
|
