| |
TM 9-2320-364-20-5
19-21
d.
Assembly.
(1)
Install two grommets (10) in cover
assembly (1).
(2)
Install two connectors (9) on rubber
tubes (4) and (5).
(3)
Lubricate rubber tubes (4) and (5) with soap
solution.
NOTE
The shorter rubber tube is
installed in the hole labeled VAL.
The longer rubber tube is
installed in the hole labeled NOZ.
Both rubber tubes should be
installed with approximately 3
inches (8 cm) sticking through
top of cover assembly.
(4)
Install rubber tubes (4) and (5) in cover
assembly (1).
(5)
Install screen (8) in washer pump (7).
(6)
Position plastic tube (6) on rubber tube (5).
(7)
Install rubber tubes (4) and (5) on washer
pump (7).
(8)
Install umbrella valve (3) on cover
assembly (1).
(9)
Install cover assembly (1) on windshield
washer reservoir (2).
|