|
| |
TM 9-2320-364-20-5
19-22
19-8. WINDSHIELD WASHER RESERVOIR AND BRACKET REPAIR (CONT).
e.
Installation.
NOTE
Perform Step (1) if foam gaskets
were removed
(1)
Install two four inch (10 cm) foam gaskets (13)
on windshield washer reservoir bracket (7).
(2)
Install windshield washer reservoir bracket
(7) on bracket (9) with three screws (12) and
locknuts (11).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(3)
Apply sealing compound to threads of two
lock screws (8).
(4)
Install bracket (9) on cab (10) using two lock
screws (8).
(5)
Install windshield washer reservoir (6) in
windshield washer reservoir bracket (7).
|
