|
| |
TM 9-2320-364-20-5
19-41
(7)
Remove six screws (20) and two foils (21) from blower housing (18).
NOTE
Blower wheels may be difficult to pull off motor shaft.
Note direction of arrow on motor indicating direction of shaft rotation.
Note position of blower wheels on shafts.
(8)
Remove four clamps (22) from two blower wheels (23) and blower wheels from motor (24) shafts.
(9)
Remove screw (25), washer (26), motor strap (27), motor insulator (28) and motor (24) from blower
housing (18).
b.
Installation.
(1)
Position motor (24) in blower housing (18).
(2)
Install motor insulator (28), motor strap (27), washer (26) and screw (25) on blower housing (18).
NOTE
Ensure blower wheels are installed as noted prior to removal.
Note direction of arrow on motor indicating direction of shaft rotation.
(3)
Install two blower wheels (23) and four clamps (22) on motor (24) shaft so that edge of fins on outside
diameter are the leading edge when blower wheels rotate in direction indicated on motor.
(4)
Install two foils (21) on blower housing (18) with six screws (20).
|
