|
| |
TM 9-2320-364-20-5
20-2
Materials/Parts
Cloth, Cleaning (Item 31, Appendix C)
Grease, General Purpose (Item 43, Appendix C)
Sealing Compound (Item 77, Appendix C)
This task covers:
a. Removal
c. Cleaning/Inspection
e. Installation
b. Disassembly
d. Assembly
f. Follow-on Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Batteries disconnected, (Para 7-87)
Cab engine access panel removed, (Para 17-24)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Hammer, Hand Soft Plastic
(Item 33, Appendix G)
Vise, Machinist’s (Item 75, Appendix G)
Wrench, Torque (0 to 175 lb-ft [0-237 N.m])
(Item 95, Appendix G)
20-2. MAIN HYDRAULIC PUMP DRIVESHAFT REPAIR.
Materials/Parts - Continued
Solvent, Drycleaning (Item 87, Appendix C)
Lockwasher (4) (Item 170, Appendix F)
U-Joint Kit (Item 341, Appendix F)
a.
Removal.
NOTE
Matchmark yoke ends prior to removal.
(1)
Remove four screws (1) and two straps (2) from pump drive shaft (3) and end yoke (4).
(2)
Remove four screws (5) and lockwashers (6) from pump drive shaft (3) and engine (7). Discard
lockwashers.
(3)
Remove pump drive shaft (3) from end yoke (4) and engine (7).
|
