|
| |
TM 9-2320-364-20-5
20-9
Materials/Parts
Cable Ties (Item 26, Appendix C)
Tags, Identification (Item 88, Appendix C)
This task covers:
a. Hose Locations
b. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Hydraulic reservoir drained, (Para 20-11)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Cap and Plug Set (Item 8, Appendix G)
20-3. MAIN HYDRAULIC HOSES REPLACEMENT.
a.
Hydraulic Hose Locations.
Equipment may be damaged by foreign matter if hoses, tubes and connectors are not plugged
and capped when removed.
NOTE
This procedure shows the location of hydraulic hoses on the truck. It will never be
necessary to remove all hydraulic hoses at one time.
As items are removed, cap and plug all hoses, tubes and connectors.
Tag and mark all hoses, pipes and tubes before removal.
Inspect all hoses, lines and fittings for cracks, bends, nicks, dents, stripping threads and
cuts. Replace all damaged parts.
Remove and replace cable ties as required.
Remove clamps and support brackets as required.
|
