|
| |
TM 9-2320-364-20-5
20-8
20-2. MAIN HYDRAULIC PUMP DRIVESHAFT REPAIR (CONT).
e.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(1)
Coat threads of four screws (5) with sealing
compound.
(2)
Install pump driveshaft assembly (3) on
engine (7) with four lockwashers (6) and
screws (5). Tighten screws to 60 lb-ft (81
N.m).
(3)
Coat threads of four screws (1) with sealing
compound.
(4)
Install pump driveshaft assembly (3) on end
yoke (4) with two straps (2) and four
screws (1). Tighten screws to 25 to 30 lb-ft
(34 to 41 N.m).
f.
Follow-On Maintenance:
Install cab engine access panel, (Para 17-24).
Connect batteries, (Para 7-87).
Start engine, (TM 9-2320-364-10).
Check driveshaft operation (operate LHS), (TM 9-2320-364-10).
Shut OFF engine, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
