|
| |
TM 9-2320-364-20-5
20-13
NOTE
Cap and plug all hoses and tubes during removal.
Tag and mark all hoses prior to removal.
Remove cable ties, clamps and support braces as required.
(1)
Remove hose 2771 (1) and preformed packing (2) from air-to-oil cooler (3). Discard preformed packing.
(2)
Remove hose 2773 (4) and preformed packing (2) from air-to-oil cooler (3). Discard preformed packing.
(3)
Remove four screws (5), washers (6), plates
(7), eight tube supports (8) and air-to-oil
cooler (3) from front support (9) and rear
support (10).
|
