|
| |
TM 9-2320-364-20-5
20-14
20-4. AIR-TO-OIL COOLER REPLACEMENT (CONT).
(4)
Remove four screws (11), lockwashers (12),
washers (13), front support (9) and rear
support (10) from support brackets (14).
Discard lockwashers.
b.
Installation.
Prevent tubes on air-to-oil
cooler from turning when
connecting hoses. Failure to
comply will cause damage to
equipment.
The fins and core of air-to-oil
cooler and radiator are easily
damaged. Use caution when
installing or damage to
equipment may occur.
(1)
Install front support (9) and rear support
(10) on support brackets (14) with four
screws (11), lockwashers (12) and
washers (13).
(2)
Install air-to-oil cooler (3) on front
support (9) and rear support (10) with four
screws (5), washers (6), plates (7) and eight
tube supports (8).
(3)
Apply lubricating oil to preformed
packings (2).
(4)
Install preformed packing (2) and hose
2773 (4) to air-to-oil cooler (3).
(5)
Install preformed packing (2) and hose
2771 (1) to air-to-oil cooler (3).
c.
Follow-On Maintenance:
Install radiator grille assembly, (Para 17-14).
Check and fill main hydraulic reservoir,
(Para 2-9, Lubrication Table 2-3).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
