|
| |
TM 9-2320-364-20-5
20-37
(1)
Remove cap (1), six screw and washer
assemblies (2), strainer (3), and gasket (4)
from hydraulic reservoir (5). Discard
gasket and screw and washer assemblies.
(2)
Remove preformed packing (6) from
cap (1). Discard preformed packing.
(3)
Position dispensing pump in hydraulic
reservoir (5).
(4)
Pump oil into storage drum.
(5)
Remove dispensing pump from hydraulic
reservoir (5).
(6)
Remove cap (1) from hydraulic reservoir (5).
(7)
Remove hydraulic drain hose (7) from
bracket (8).
(8)
Remove tethered cap (9) and position
hydraulic drain hose over storage drum.
(9)
Open valve (10) and drain oil into storage
drum.
(10)
Close valve (10), install tethered cap (9) and
position hydraulic drain hose (7) into
bracket (8).
(11)
Position drain pan under plug (11).
(12)
Remove plug (11) from hydraulic reservoir
(5) and drain excess oil.
(13)
Remove and discard preformed packing
(12) from plug (11).
11
12
5
|
