|
| |
TM 9-2320-364-20-5
20-38
20-11. MAIN HYDRAULIC RESERVOIR SERVICE (CONT).
(14)
Apply lubricating oil to preformed packing
(12) and install on plug (11).
(15)
Install plug (11) in hydraulic reservoir (5).
NOTE
Perform Steps (16) and (17) if
preformed packing, gasket, and
strainer were removed.
(16)
Apply lubricating oil to preformed packing
(6) and install on cap (1).
(17)
Install gasket (4) and strainer (3) on
hydraulic reservoir (5) with six screw and
washer assemblies (2). Tighten screws to
10 to 15 lb-in (1 to 2 N.m).
(18)
Install cap (1) on strainer (3).
|
