| |
TM 9-2320-364-20-5
21-77
a.
Removal.
The hydraulic system operates at
high pressures. Never disconnect
any hydraulic line or fitting
without first dropping pressure to
zero. Failure to comply may
result in serious injury or death to
personnel.
NOTE
Tag and mark hoses prior to
removal.
Cap and plug hoses after
removal.
Position drain pan under
valve.
(1)
Loosen screw (1) and disconnect MC134
connector (2) from auxiliary hydraulic valve
(3).
(2)
Remove hose 2810 (4), preformed packing
(5), fitting (6) and preformed packing (7).
Discard preformed packings.
(3)
Remove hose 2902 (8), preformed packing
(9), elbow (10) and preformed packing (11).
Discard preformed packings.
(4)
Remove hose 2774 (12), preformed packing
(13), elbow (14) and preformed packing
(15). Discard preformed packings.
(5)
Remove four screws (16), lockwashers (17),
washers (18) and auxiliary hydraulic valve
(3) from fender (19). Discard lockwashers.
18
16
17
1
2
3
14
13
12
10
9
8
4
6
5
7
15
11
19
|