|
| |
TM 9-2320-364-20-5
21-78
21-17. INTERFACE AUXILIARY HYDRAULIC VALVE REPLACEMENT (CONT).
b.
Installation.
(1)
Install auxiliary hydraulic valve (3) on
fender (19) with four screws (16),
lockwashers (17) and washers (18).
(2)
Apply hydraulic oil to preformed packings
(5), (7), (9), (11), (13) and (15).
(3)
Install preformed packing (15), elbow
(14), preformed packing (13) and hose
2774 (12) on auxiliary hydraulic valve (3).
(4)
Install preformed packing (11), elbow (10),
preformed packing (9) and hose 2902 (8) on
auxiliary hydraulic valve (3).
(5)
Install preformed packing (7), fitting (6),
preformed packing (5) and hose 2810 (4)
on auxiliary hydraulic valve (3).
(6)
Connect MC134 connector (2) to auxiliary
hydraulic valve (3) and tighten screw (1).
c.
Follow-on Maintenance:
Connect batteries, (Para 7-87).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
18
16
17
1
2
3
14
13
12
10
9
8
4
6
5
7
15
11
19
|
