|
| |
TM 9-2320-364-20-5
21-103
(23)
Connect CHU proximity switch MC188
connector (1) on CHU wire harness (2).
c.
Adjustment.
(1)
Connect batteries, (Para 7-87).
(2)
Start engine, set hydraulic selector switch (1)
to MAN H.A. and raise hook arm (2) until
sensor plate (3) covers approximately half of
proximity switch (4)
(TM 9-2320-364-10).
(3)
Shut OFF engine.
(4)
Using feeler gage, adjust clearance between
CHU proximity switch (4) and sensor
plate (3) to 0.125 in. 0.01 in. (3.18 mm
0.25 mm) and tighten nuts (5).
d.
Follow-on Maintenance:
Check operation of hook arm, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
1
2
3
4
5
2
1
STEERING
WHEEL SHOWN
REMOVED FOR CLARITY
|
