|
| |
TM 9-2320-364-20-5
21-102
21-24. CONTAINER HANDLING UNIT (CHU) PROXIMITY SWITCH AND SENSING
PLATE REPLACEMENT/ADJUSTMENT (HOOK ARM UP) (CONT).
(17)
Measure and mark an area on hook arm
(15) for sensor plate (9) to be mounted.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent or sealing compound gets
on skin or clothing, wash
immediately with soap and water.
(18)
Using epoxy, mount sensor plate (9) and
clamp in place until cured (approximately
15 minutes).
(19)
Remove clamps from hook arm (15).
(20)
Prime and paint area as necessary.
(21)
Install two screws (6), lockwashers (7) and
proximity switch mount (5) on two clamp
halves (8).
(22)
Install CHU proximity switch (4) and two
nuts (3) on proximity switch mount (5).
3
4
8
5
7
6
3
2.59 IN.
(6.58 CM)
0.15 IN.
(3.81 MM)
15
9
9
15
CLAMPS
|
