|
| |
TM 9-2320-364-20-5
21-118
21-27. CONTAINER HANDLING UNIT (CHU) LIGHT BAR AND BRACKETS
ASSEMBLY REPAIR (CONT).
b.
Disassembly.
Use care when removing bracket
to prevent wires from being
damaged.
NOTE
Perform Step (1) for both
sides of rear light bar
assembly.
Note position of wires and
ground wires prior to
disassembly.
(1)
Disconnect wire 1680 (1) from wire 490 (2).
(2)
Remove two screws (3) from blackout lens
cover (4).
(3)
Remove blackout lamp (5) from blackout
lamp socket (6).
(4)
Remove two screws (7), locknuts (8), ground
wire (9), blackout light assembly (10) and
gasket (11) from rear light bar assembly
(12). Discard locknuts.
c.
Cleaning and Inspection.
(1)
Inspect all wires and connectors for damage.
(2)
Inspect bulbs, LEDs and lens for cracks.
(3)
Inspect all other parts for cracks or other
damage.
(4)
Replace all damaged parts. If entire marker
light assembly is being replaced, new marker
light assembly will be a LED.
1
2
4
3
5
6
7
8
10
11
12
9
|
